{"id":297,"date":"2026-11-03T04:57:42","date_gmt":"2026-11-03T09:57:42","guid":{"rendered":"https:\/\/blackbadgedoors.com\/blogs\/news\/what-is-a-pivot-door.html"},"modified":"2026-11-03T04:57:43","modified_gmt":"2026-11-03T09:57:43","slug":"what-is-a-pivot-door","status":"publish","type":"post","link":"https:\/\/blackbadgedoors.com\/blogs\/news\/what-is-a-pivot-door.html","title":{"rendered":"What Is a Pivot Door? Design, Uses and Limits"},"content":{"rendered":"<p>You&#039;re looking at a wide front entry in a showroom or a photo, and the door doesn&#039;t open the way you expect. Instead of swinging from hinges on one side, part of it moves toward you while the larger part moves away. That&#039;s when many ask <strong>what is a pivot door<\/strong>, and whether that unusual movement is a benefit or a complication. The answer starts with mechanics, not style. A pivot door is a load and clearance system first. Once you understand where its weight goes and where the leaf travels, you can judge where it works well and where a hinged door is the safer choice.<\/p>\n<h2>Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-a-pivot-door-is-and-how-it-differs-from-a-hinged-door\">What a Pivot Door Is and How It Differs From a Hinged Door<\/a><ul>\n<li><a href=\"#two-common-misreadings\">Two common misreadings<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#how-pivot-hardware-carries-load-and-sets-the-swing\">How Pivot Hardware Carries Load and Sets the Swing<\/a><ul>\n<li><a href=\"#where-you-place-the-axis-changes-everything-else\">Where you place the axis changes everything else<\/a><\/li>\n<li><a href=\"#load-ranges-are-selection-guides-not-promises\">Load ranges are selection guides, not promises<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#where-pivot-doors-work-best-in-homes-and-commercial-buildings\">Where Pivot Doors Work Best in Homes and Commercial Buildings<\/a><ul>\n<li><a href=\"#residential-entries-and-interiors\">Residential entries and interiors<\/a><\/li>\n<li><a href=\"#lobbies-showrooms-and-hospitality-spaces\">Lobbies, showrooms, and hospitality spaces<\/a><\/li>\n<li><a href=\"#oversized-and-unusual-openings\">Oversized and unusual openings<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#wind-air-and-water\">Wind, Air and Water<\/a><ul>\n<li><a href=\"#sort-the-opening-by-exposure\">Sort the opening by exposure<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#accessibility-requirements-and-opening-force\">Accessibility Requirements and Opening Force<\/a><\/li>\n<li><a href=\"#confirm-specs-before-you-order-a-pivot-door\">Confirm Specs Before You Order a Pivot Door<\/a><\/li>\n<\/ul>\n<p><a id=\"what-a-pivot-door-is-and-how-it-differs-from-a-hinged-door\"><\/a><\/p>\n<h2>What a Pivot Door Is and How It Differs From a Hinged Door<\/h2>\n<p>A <strong>pivot door<\/strong> is a door leaf that turns on pivot hardware at its top and bottom rather than on butt hinges along one side edge. The <a href=\"https:\/\/intypes.cornell.edu\/expanded.cfm?erID=172\">Cornell Intypes description of pivot doors<\/a> explains that the upper pivot connects to the head of the frame while the lower pivot is anchored in the floor or threshold, so the leaf&#039;s weight travels down through the floor and header instead of pulling sideways on a jamb.<\/p>\n<p>The principle is ancient. Egyptian doors rotated on projecting upper and lower pivots set into sockets, and Roman monumental doors used the same arrangement to carry their heavy leaves. The reason then is the reason now: pivoting moves a large, heavy leaf without hanging all of its weight from one jamb.<\/p>\n<p>The distinction matters because the two systems ask different things of the opening around them.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Feature<\/th>\n<th>Pivot door<\/th>\n<th>Hinged door<\/th>\n<\/tr>\n<tr>\n<td>Rotation point<\/td>\n<td>Top and bottom pivots, can sit inside the leaf<\/td>\n<td>Butt hinges along one side edge<\/td>\n<\/tr>\n<tr>\n<td>Swing direction<\/td>\n<td>Inward, outward or both, depending on configuration<\/td>\n<td>Usually one direction, set by the hinge side<\/td>\n<\/tr>\n<tr>\n<td>Weight carried by<\/td>\n<td>Floor socket and head of the frame<\/td>\n<td>Hinge side of the frame<\/td>\n<\/tr>\n<tr>\n<td>Typical leaf<\/td>\n<td>Large, heavy or design-led openings<\/td>\n<td>Standard residential leaves<\/td>\n<\/tr>\n<tr>\n<td>Best fit<\/td>\n<td>Oversized entries and offset, minimalist designs<\/td>\n<td>Everyday interior and exterior doors<\/td>\n<\/tr>\n<\/table><\/figure>\n<p><a id=\"two-common-misreadings\"><\/a><\/p>\n<h3>Two common misreadings<\/h3>\n<p>A door that looks like a pivot design but hangs on side hinges is still a <strong>hinged door<\/strong>. Size doesn&#039;t settle it either. A large leaf can be side-hung, and a modest leaf can pivot. The test is mechanical: trace where the weight goes. If it lands on a floor socket and a head connection, the door pivots. If it hangs off screws in the jamb, it hinges.<\/p>\n<p>Compare that with a pair of <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/double-french-doors\">double French doors<\/a>, where two hinged leaves meet in the middle. The visual width may be similar, but the load path and swing are completely different.<\/p>\n<blockquote>\n<p>Look at the top and bottom of the leaf. If the door turns on points at its head and floor rather than on hinges along its side, it&#039;s a pivot door.<\/p>\n<\/blockquote>\n<p>The pivot itself can sit <strong>centred, near the stile, or offset inside the leaf<\/strong>, and that position is what lets many pivot doors open inward, outward, or both ways depending on configuration.<\/p>\n<p><a id=\"how-pivot-hardware-carries-load-and-sets-the-swing\"><\/a><\/p>\n<h2>How Pivot Hardware Carries Load and Sets the Swing<\/h2>\n<p>Think of the hardware as a <strong>vertical axis<\/strong>, not as a stronger hinge. The bottom pivot and top pivot must align plumb. If they don&#039;t, the leaf binds, reveals open unevenly, and seals lose contact.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/what-is-a-pivot-door-pivot-hardware.jpg\" alt=\"A diagram explaining pivot door hardware mechanics, showing the top pivot, bottom pivot, and vertical alignment axis.\" \/><\/figure><\/p>\n<p>The <a href=\"https:\/\/www.hafeleindia.com\/INTERSHOP\/static\/WFS\/Haefele-HIN-Site\/-\/Haefele-HIN\/en_IN\/opentext\/assets\/HIN\/AHPivotDoors.pdf\">H\u00e4fele pivot door hardware guide<\/a> describes the division of work clearly. The <strong>bottom pivot<\/strong> generally transfers most vertical dead load into the floor or structural threshold, while the <strong>top pivot<\/strong> stabilizes and guides the leaf. That means the floor build-up under the pivot isn&#039;t a finishing detail. It&#039;s structure.<\/p>\n<p>Say you&#039;re specifying a tall steel and glass entry. The installer has to anchor the bottom assembly into a substrate that won&#039;t deflect or settle, then align the top pivot in a stable head. A floating timber floor or a weak threshold can undermine hardware that is otherwise correctly rated.<\/p>\n<p><a id=\"where-you-place-the-axis-changes-everything-else\"><\/a><\/p>\n<h3>Where you place the axis changes everything else<\/h3>\n<p>A centred axis splits the leaf into two roughly equal parts. An axis near the stile behaves more like a hinged door, though the load still goes into the floor. An <strong>offset axis<\/strong> creates the familiar pivot movement. One portion of the slab swings inward while the remaining tail swings outward.<\/p>\n<p>That geometry changes four things you must draw before ordering:<\/p>\n<ul>\n<li><strong>Opening envelope:<\/strong> the space the leaf occupies through its full rotation, on both sides of the opening.<\/li>\n<li><strong>Handle travel:<\/strong> the arc the handle follows, which affects where a user naturally stands.<\/li>\n<li><strong>Clear passage:<\/strong> the usable width left when the door is at its normal open position, not just the slab width.<\/li>\n<li><strong>Maneuvering space:<\/strong> room to approach, pull or push, and move clear of the tail.<\/li>\n<\/ul>\n<p>Map that swing path against adjacent walls, furniture, glazing, sidelites, planters, and circulation routes. A console table that works beside a hinged door may sit directly in the path of a pivot tail. A sidelite frame can also become the collision point that limits the opening angle long before the hardware reaches its stop.<\/p>\n<blockquote>\n<p><strong>Design check:<\/strong> Draw the leaf at closed, partly open, and fully open positions. If you only draw it closed, you haven&#039;t checked a pivot door.<\/p>\n<\/blockquote>\n<p><a id=\"load-ranges-are-selection-guides-not-promises\"><\/a><\/p>\n<h3>Load ranges are selection guides, not promises<\/h3>\n<p>Pivot hardware is often chosen because a leaf is too heavy or too wide for a row of butt hinges to carry comfortably. The <a href=\"https:\/\/www.britannica.com\/print\/article\/169259\">Britannica architectural hardware guidance<\/a> states that pivot hinges can be specified for loads ranging from <strong>about 20 to 500 kilograms<\/strong>, depending on hardware design, while conventional butt hinges are commonly recommended only up to <strong>approximately 300 pounds, or 136 kilograms<\/strong>, before a continuous or pivot hinge becomes preferable.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Hardware<\/th>\n<th>Typical load range<\/th>\n<th>Use it when<\/th>\n<\/tr>\n<tr>\n<td>Butt hinges<\/td>\n<td>Up to about 136 kg (300 lb)<\/td>\n<td>Standard interior and exterior doors<\/td>\n<\/tr>\n<tr>\n<td>Pivot hinges<\/td>\n<td>About 20 to 500 kg, depending on hardware design<\/td>\n<td>Heavy, oversized or glazed leaves<\/td>\n<\/tr>\n<tr>\n<td>Continuous hinges<\/td>\n<td>Above about 136 kg (300 lb)<\/td>\n<td>Long leaves that need full-height support<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>Don&#039;t read those figures as universal limits. Actual capacity depends on <strong>rated weight, width, height, thickness, material, glazing, centre of gravity, closing moment, operating frequency, floor structure, and installation quality<\/strong>. A wide leaf puts more strain on the hardware than a narrow leaf of the same weight. Heavy glass set away from the axis changes the centre of gravity. A strong integrated closer adds force the user and the hardware both have to manage.<\/p>\n<p>That&#039;s why you verify capacity with manufacturer calculations and project shop drawings rather than inferring it from concealed fittings. Hidden hardware tells you nothing about its rating. The same caution applies outdoors, where exposure changes hardware choice. The reasoning behind <a href=\"https:\/\/alliedfenceandgate.com\/blog\/gate-hinges-and-hardware\">choosing gate hinges for Florida&#039;s climate<\/a> is a useful parallel. Corrosion, wind, and frequency of use belong in the hardware decision from the start, not after the leaf is fabricated.<\/p>\n<p>For exterior steel or aluminum assemblies, you also coordinate the pivot with seals, drainage, wind resistance, thermal performance, and structural anchorage. Those items aren&#039;t accessories added around the axis. They determine whether the axis can work in that opening at all.<\/p>\n<p><strong>The pivot axis, not the door&#039;s looks, decides how the door moves.<\/strong><\/p>\n<p><a id=\"where-pivot-doors-work-best-in-homes-and-commercial-buildings\"><\/a><\/p>\n<h2>Where Pivot Doors Work Best in Homes and Commercial Buildings<\/h2>\n<p>Scale explains most good pivot decisions. In 2024, <a href=\"https:\/\/www.sierrapacificwindows.com\/Product\/Detail\/Door\/Pivot\/Aluminum%20Clad%20Wood\/Pivot%20Door\">Sierra Pacific Windows published pivot door specifications<\/a> accommodating panels up to <strong>50 square feet<\/strong>, with maximum dimensions of <strong>10 feet high or 6 feet wide<\/strong>. At that size, you&#039;re no longer choosing a pivot only for effect. You&#039;re choosing a load path that suits the leaf.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/what-is-a-pivot-door-pivot-door-specifications.jpg\" alt=\"A dual-view comparison showing a wooden residential pivot door and a black commercial pivot door with dimension specifications.\" \/><\/figure><\/p>\n<p><a id=\"residential-entries-and-interiors\"><\/a><\/p>\n<h3>Residential entries and interiors<\/h3>\n<p>Say a custom home has a wide front opening with sidelites and a single broad visual plane. A pivot leaf can fill that opening without splitting it into two hinged doors. The driver is <strong>visual continuity<\/strong>, supported by hardware that carries the larger slab from the floor.<\/p>\n<p>Inside the house, the logic is different. A pivot door to a pantry, study, or primary suite doesn&#039;t need weather seals or wind resistance. It needs a swing path that clears shelving and furniture, and a weight that household members can control comfortably. Interior use is often the lowest-risk place to enjoy the movement.<\/p>\n<p><a id=\"lobbies-showrooms-and-hospitality-spaces\"><\/a><\/p>\n<h3>Lobbies, showrooms, and hospitality spaces<\/h3>\n<p>In a hotel lobby or showroom, a wide opening helps groups move through without funneling everyone toward one hinged leaf. Traffic drives the choice. So does closer behavior. Staff need predictable closing speed, reliable latching where required, and hold-open control that doesn&#039;t leave a heavy leaf drifting into circulation space.<\/p>\n<p>Commercial use also exposes weak specification quickly. Frequent cycles wear poorly aligned pivots, and guests won&#039;t adapt their path around an unexpected tail swing. You need clear floor space on both sides of the axis.<\/p>\n<p><a id=\"oversized-and-unusual-openings\"><\/a><\/p>\n<h3>Oversized and unusual openings<\/h3>\n<p>Arched, multi-panel, or very tall spans create a third case. A standard hinged leaf may become too heavy for its jamb or too narrow to match the proportions of the opening. Weight drives the pivot decision here. The floor carries the leaf, so the designer gains more freedom with height, width, and glazing.<\/p>\n<p>That freedom has a limit. A larger leaf still needs structure at the pivot, clearance for its tail, and hardware rated for its actual mass and dimensions.<\/p>\n<p>Use a short test before pricing. If the opening is <strong>large, heavy, or design-critical<\/strong>, a pivot is worth investigating. If it&#039;s a standard everyday door in a tight hallway, a hinged door is usually simpler to seal, operate, and maintain.<\/p>\n<p><a id=\"wind-air-and-water\"><\/a><\/p>\n<h2>Wind, Air and Water<\/h2>\n<p>A pivot door is a load and clearance system before it is a style choice, and weather exposure is where that framing earns its keep. A conventional hinged leaf hangs off a jamb that also carries a continuous compression seal. A pivot leaf rotates on pivot rods at the top and bottom, so the seal has to work around an offset axis and a penetration at the floor and head. Neither detail makes the door bad. Both change what &quot;weather-rated&quot; has to cover.<\/p>\n<p>U.S. specifications commonly reference three exterior tests: <strong>ASTM E330<\/strong> for structural performance under wind pressure, <strong>ASTM E283<\/strong> for air leakage, and <strong>ASTM E331<\/strong> for water penetration. Judge the complete tested assembly: slab, frame, pivot hardware, seals, threshold, glass, and installation. A strong result for the slab alone says little about the finished entrance.<\/p>\n<p>Wind resistance and water resistance are separate tests, and product approvals often treat them separately. A door can be cleared for structural wind load while its listing carries no documented water-infiltration rating at all. Anticipate the confusion here: passing E330 proves the assembly stayed in its frame under pressure. It says nothing about whether water crossed the threshold during E331.<\/p>\n<blockquote>\n<p>A pivot door can be structurally rated yet still be a poor choice for an exposed entry if water-management performance is not documented.<\/p>\n<\/blockquote>\n<p>Wind pressure works like a steady push against the face of the leaf. Driven rain works like water thrown at every seam at once. The likely leak paths on a pivot are the threshold, the head, and the pivot penetration itself. Once water gets past those interfaces, the problem moves into flooring, framing, and wall cavities. Guidance on <a href=\"https:\/\/www.pinnaclerealestatemarketing.com\/real-estate-marketing-guides\/how-to-prevent-water-from-compromising-the-integrity-of-a-houses-walls\/\">preserving wall integrity against water damage<\/a> shows why small, repeated entry leaks should not be dismissed as cosmetic.<\/p>\n<p><a id=\"sort-the-opening-by-exposure\"><\/a><\/p>\n<h3>Sort the opening by exposure<\/h3>\n<p>Treat interior pivot doors as furniture-scale moving panels. Weather testing doesn&#039;t drive that decision. Clearance, weight, and user control do.<\/p>\n<p>A sheltered exterior door sits under a deep porch or overhang that limits driven rain. You still want documented air and water results, but the protection gives the threshold and seals a more forgiving job.<\/p>\n<p>A fully exposed coastal entrance is the strictest case. Wind drives rain into every variable gap, and a flush threshold removes one of the barriers that keeps water out. In that situation, compare a tested pivot assembly carefully against a <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/steel-exterior-door\">steel exterior door<\/a> on hinges before committing to the pivot movement.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Requirement<\/th>\n<th>Figure or reference<\/th>\n<th>Why it matters<\/th>\n<\/tr>\n<tr>\n<td>Exterior structural, air and water tests<\/td>\n<td><a href=\"https:\/\/www.arcat.com\/specification\/therma-tru-doors-41444\/08_13_00ttd\">ASTM E330, E283, E331<\/a><\/td>\n<td>Confirms wind, air and water performance of the full tested assembly<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>For any exterior purchase, request the <strong>exact tested size, design pressure, impact status, air-infiltration result, water test pressure, threshold details, and installation limitations<\/strong>. A result for a smaller test door does not prove your larger door will perform the same way.<\/p>\n<p>Oversized leaves, large glass areas, and flush thresholds pull the design in the opposite direction from weather resistance. Name that conflict early. Then decide which requirement governs.<\/p>\n<p><a id=\"accessibility-requirements-and-opening-force\"><\/a><\/p>\n<h2>Accessibility Requirements and Opening Force<\/h2>\n<p>A pivot door on a U.S. accessible route must meet the same operable-door constraints as any other door. The <a href=\"https:\/\/www.access-board.gov\/files\/ada\/guides\/entrances.pdf\">U.S. Access Board ADA guidance on entrances<\/a> identifies a maximum opening force of <strong>5 lbf<\/strong> for interior non-fire doors, a threshold limit of <strong>1\/2 inch<\/strong> in new construction, and requirements for compliant operable hardware and maneuvering clearances.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Requirement<\/th>\n<th>Figure<\/th>\n<th>Why it matters<\/th>\n<\/tr>\n<tr>\n<td>Maximum opening force, interior non-fire doors<\/td>\n<td>5 lbf<\/td>\n<td>Oversized leaves and strong closers can exceed it<\/td>\n<\/tr>\n<tr>\n<td>Threshold height, new construction<\/td>\n<td>1\/2 inch<\/td>\n<td>A floor pivot can create an excessive level change<\/td>\n<\/tr>\n<tr>\n<td>Space between two pivot doors in series<\/td>\n<td>48 inches plus swing width<\/td>\n<td>Lets users clear one leaf before operating the next<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>Pivot geometry makes those checks harder. The offset axis lets the leaf occupy space on <strong>both sides of the axis<\/strong>, so a wheelchair user may need to clear the main leaf and its tail. The leaf can also reduce the effective clear opening near the pivot-side edge. Nominal slab width therefore tells you very little.<\/p>\n<p>Measure the <strong>clear opening at the most restrictive point<\/strong>, with the door in its usable open position. Check both approach sides. A layout exercise such as <a href=\"https:\/\/www.trademasterkz.com\/ada-compliant-bathroom-dimensions\/\">planning accessible bathroom layouts<\/a> reinforces the same habit. You design around the user&#039;s path and turning space, not around the product&#039;s catalogue dimension.<\/p>\n<p>Force is the second problem. Oversized leaves, compression seals, wind pressure, and strong closers can push operating force beyond what the hardware rating suggests on paper. A door that feels balanced in a still showroom can become hard to start, stop, or hold when wind catches its broad face.<\/p>\n<p>Record these items on site before sign-off:<\/p>\n<ul>\n<li><strong>Clear opening:<\/strong> measure at the tightest point created by leaf, frame, and hardware.<\/li>\n<li><strong>Threshold height:<\/strong> confirm the floor pivot doesn&#039;t create an excessive level change.<\/li>\n<li><strong>Opening force and closing speed:<\/strong> test with seals and closer settings in their final condition.<\/li>\n<li><strong>Hold-open and egress:<\/strong> confirm users can pass safely and exit without fighting the leaf.<\/li>\n<\/ul>\n<p>Where two pivot doors occur in series, allow at least <strong>48 inches plus the width of the door swinging into the space between them<\/strong>. That space lets a user clear one leaf before operating the next.<\/p>\n<p>Don&#039;t infer accessibility from smooth pivot motion. Verify it with measurements.<\/p>\n<p><a id=\"confirm-specs-before-you-order-a-pivot-door\"><\/a><\/p>\n<h2>Confirm Specs Before You Order a Pivot Door<\/h2>\n<p>Choose a pivot door when the leaf is <strong>large, heavy, or design-critical<\/strong> and the opening can support its floor load and swing path. If those conditions aren&#039;t present, a hinged door will usually give you easier sealing and simpler daily operation for less coordination.<\/p>\n<p>Work through this checklist before you ask for pricing:<\/p>\n<ol>\n<li><strong>Confirm the full leaf weight.<\/strong> Include the slab, glazing, cladding, handle, and any integrated closer, then compare it with the pivot hardware&#039;s rated capacity.<\/li>\n<li><strong>Fix the axis position.<\/strong> State whether it&#039;s centred, near the stile, or offset, and give the exact dimension from the jamb or leaf edge.<\/li>\n<li><strong>Draw the swing path.<\/strong> Check walls, furniture, sidelites, landscaping, and circulation on both sides, then confirm clear opening at the tightest point.<\/li>\n<li><strong>Verify the structure.<\/strong> Identify what supports the bottom pivot and what anchors the top pivot, including any reinforcement needed in the floor or head.<\/li>\n<li><strong>Document exterior performance.<\/strong> For an outside door, obtain tested wind, air, and water results for that exact size and configuration, not a similar one.<\/li>\n<li><strong>Test operability.<\/strong> Specify opening force, closing speed, hold-open behavior, latching, threshold height, and emergency egress requirements.<\/li>\n<li><strong>Request proof.<\/strong> Ask every supplier for shop drawings and manufacturer capacity calculations tied to your dimensions and exposure.<\/li>\n<\/ol>\n<p>Material choice follows the opening and its exposure. We make custom pivot doors to order in <strong>wood, metal, and glass<\/strong>, in any size from small to extremely large. That range is useful only if the specification starts with the opening rather than a stock size. Guidance on <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/custom-dimensions\">custom dimensions<\/a> helps you record width, height, and configuration in the form a fabricator needs.<\/p>\n<p>Give each supplier the same package: opening measurements, axis location, leaf material and glazing, estimated weight, exposure, threshold condition, and accessibility needs. Comparable quotes come from comparable information. Without it, one price may include rated hardware and weather detailing while another covers only a visually similar leaf.<\/p>\n<hr>\n<p>If your opening calls for an oversized steel, metal, or glass pivot door, Black Badge Doors builds custom units to your exact size and configuration, with pivot points at the top and bottom instead of traditional side hinges. Bring your measurements, exposure details, and swing requirements to <a href=\"https:\/\/blackbadgedoors.com\">Black Badge Doors<\/a> and ask for shop drawings that confirm the hardware, clear opening, and threshold will work in your space.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>You&#039;re looking at a wide front entry in a showroom or a photo, and the door doesn&#039;t open the way you expect. Instead of swinging from hinges on one side, part of it moves toward you while the larger part moves away. That&#039;s when many ask what is a pivot door, and whether that unusual [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":296,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[205,202,203,204,206],"class_list":["post-297","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized","tag-oversized-entry-doors","tag-pivot-door","tag-pivot-door-hardware","tag-pivot-vs-hinged-door","tag-steel-pivot-doors"],"_links":{"self":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/297","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/comments?post=297"}],"version-history":[{"count":1,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/297\/revisions"}],"predecessor-version":[{"id":300,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/297\/revisions\/300"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media\/296"}],"wp:attachment":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media?parent=297"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/categories?post=297"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/tags?post=297"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}