{"id":308,"date":"2026-11-21T04:41:23","date_gmt":"2026-11-21T09:41:23","guid":{"rendered":"https:\/\/blackbadgedoors.com\/blogs\/news\/steel-entry-door-and-frame.html"},"modified":"2026-11-21T04:41:24","modified_gmt":"2026-11-21T09:41:24","slug":"steel-entry-door-and-frame","status":"publish","type":"post","link":"https:\/\/blackbadgedoors.com\/blogs\/news\/steel-entry-door-and-frame.html","title":{"rendered":"Steel Entry Door and Frame Spec Guide"},"content":{"rendered":"<p>A remodel can reach the point where the opening is framed, the floor is nearly finished, and the chosen door still doesn&#039;t fit. The header may be too low for a transom, a sidelight may crowd the swing, or the planned threshold may sit above the finished floor. At that stage, changing the leaf alone won&#039;t solve the problem: the steel entry door and frame need to be laid out as one assembly.<\/p>\n<p>That assembly includes the leaf, welded or knock-down frame, threshold, weather seals, glazing, and hardware preparation. Choose those parts together, then give the shop drawing to the contractor before the opening is closed in.<\/p>\n<h2>Table of Contents<\/h2>\n<ul>\n<li><a href=\"#steel-entry-door-and-frame-size-chart\">Steel Entry Door and Frame Size Chart<\/a><ul>\n<li><a href=\"#measure-the-wall-not-just-the-leaf\">Measure the wall, not just the leaf<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#entry-assembly-categories-by-operation\">Entry Assembly Categories by Operation<\/a><ul>\n<li><a href=\"#choose-the-movement-first\">Choose the movement first<\/a><\/li>\n<li><a href=\"#specify-the-frame-family\">Specify the frame family<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#frame-profiles-thermal-breaks-and-cores\">Frame Profiles Thermal Breaks and Cores<\/a><\/li>\n<li><a href=\"#hardware-thresholds-and-glass-choices\">Hardware Thresholds and Glass Choices<\/a><ul>\n<li><a href=\"#coordinate-the-sill-and-glass\">Coordinate the sill and glass<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#how-to-frame-and-set-the-assembly\">How to Frame and Set the Assembly<\/a><\/li>\n<li><a href=\"#corrosion-protection-and-finish-systems\">Corrosion Protection and Finish Systems<\/a><ul>\n<li><a href=\"#adjust-the-protection-to-the-exposure\">Adjust the protection to the exposure<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#energy-air-water-and-code-checks\">Energy Air Water and Code Checks<\/a><ul>\n<li><a href=\"#match-the-test-to-the-exposure\">Match the test to the exposure<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#write-the-spec-and-order-the-assembly\">Write the Spec and Order the Assembly<\/a><\/li>\n<\/ul>\n<p><a id=\"steel-entry-door-and-frame-size-chart\"><\/a><\/p>\n<h2>Steel Entry Door and Frame Size Chart<\/h2>\n<p>Copy the size and opening information onto a sketch of the wall. The rough-opening figures below are typical allowances for a welded frame with a threshold, not a promise that every manufacturer uses the same dimensions. Made-to-order steel assemblies often use dimensions outside these standard modules. <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/custom-dimensions\">Custom steel door dimensions<\/a> can be set to suit the opening and design rather than forcing the opening to follow a stock leaf.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Nominal size<\/th>\n<th>Common jamb depth<\/th>\n<th>Typical use<\/th>\n<\/tr>\n<tr>\n<td>2-8 x 6-8 single; rough opening about 2 to 2-1\/2 inches wider and taller than the leaf<\/td>\n<td>4-9\/16 inches for a typical 2&#215;4 wall with drywall both sides<\/td>\n<td>Narrow residential entry<\/td>\n<\/tr>\n<tr>\n<td>3-0 x 6-8 single; rough opening about 2 to 2-1\/2 inches wider and taller than the leaf<\/td>\n<td>4-9\/16 inches for a typical 2&#215;4 wall with drywall both sides<\/td>\n<td>Most common single entry<\/td>\n<\/tr>\n<tr>\n<td>3-0 x 7-0 single; rough opening about 2 to 2-1\/2 inches wider and taller than the leaf<\/td>\n<td>5-5\/8 to 6-9\/16 inches for a 2&#215;6 wall or thicker cladding<\/td>\n<td>Taller residential entry<\/td>\n<\/tr>\n<tr>\n<td>3-0 x 8-0 single; rough opening about 2 to 2-1\/2 inches wider and taller than the leaf<\/td>\n<td>Custom return for brick, stucco, or thick cladding<\/td>\n<td>Full-height modern entry<\/td>\n<\/tr>\n<tr>\n<td>3-6 x 8-0 single; rough opening about 2 to 2-1\/2 inches wider and taller than the leaf<\/td>\n<td>Custom return<\/td>\n<td>Wide single or pivot-ready opening<\/td>\n<\/tr>\n<tr>\n<td>5-0 x 6-8 pair; rough opening about 2 to 2-1\/2 inches wider and taller than the pair<\/td>\n<td>4-9\/16 inches for a typical 2&#215;4 wall with drywall both sides<\/td>\n<td>Narrow French or double<\/td>\n<\/tr>\n<tr>\n<td>6-0 x 6-8 pair; rough opening about 2 to 2-1\/2 inches wider and taller than the pair<\/td>\n<td>5-5\/8 to 6-9\/16 inches for a 2&#215;6 wall or thicker cladding<\/td>\n<td>Standard double entry<\/td>\n<\/tr>\n<tr>\n<td>6-0 x 8-0 pair; rough opening about 2 to 2-1\/2 inches wider and taller than the pair<\/td>\n<td>Custom return<\/td>\n<td>Tall double or French entry<\/td>\n<\/tr>\n<\/table><\/figure>\n<p><a id=\"measure-the-wall-not-just-the-leaf\"><\/a><\/p>\n<h3>Measure the wall, not just the leaf<\/h3>\n<p>Jamb depth follows the finished wall assembly. A 2&#215;4 wall with drywall on both sides commonly calls for a 4-9\/16-inch jamb. A 2&#215;6 wall, added interior finish, or thicker exterior cladding can require a deeper jamb or a custom return. Brick and stucco often need a detail that wraps or meets the finish cleanly, rather than a standard flat jamb.<\/p>\n<p>The rough opening leaves room to set and shim the frame, then seal the perimeter. Measure from framing, not from trim or finish material, and account for the sill pan and threshold when establishing height. A nominal door size doesn&#039;t tell you the frame&#039;s outside dimensions or the usable clear opening.<\/p>\n<p>Start by matching the clear opening and jamb depth to the project. Confirm swing, glass, and hardware after those constraints are known. Forcing a stock size into an opening with the wrong head height or wall depth usually creates awkward trim, compromised seals, or a frame that cannot be anchored as intended.<\/p>\n<p><a id=\"entry-assembly-categories-by-operation\"><\/a><\/p>\n<h2>Entry Assembly Categories by Operation<\/h2>\n<p>A door&#039;s operation and its frame construction solve different problems. Operation sets the way the leaf moves and affects the header, hardware, and clear opening. Frame construction determines how the assembly is made, how much visual mass it has, and whether a thermal break can interrupt heat flow through the metal.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/steel-entry-door-and-frame-entry-categories.jpg\" alt=\"A diagram illustrating the categorization of entry assemblies by leaf movement, frame construction, and operating factors.\" \/><\/figure><\/p>\n<p><a id=\"choose-the-movement-first\"><\/a><\/p>\n<h3>Choose the movement first<\/h3>\n<p>A single swing leaf is the familiar residential choice and can be configured to swing in or out. Inswing doors are often simpler to protect from weather with an overhang; outswing doors can preserve interior floor space, but their exposed hinges, sill, and drainage details need attention.<\/p>\n<p>French or paired doors divide the opening between two leaves. Usually one leaf is active and the other is secured with flush bolts; an astragal closes the meeting gap. A pivot door rotates on top and bottom pivots rather than side hinges. That changes where the load goes, so the head and floor need to be designed for the pivot hardware and the weight of the leaf. A wide leaf may suit a pivot layout, but the operation is not a drop-in hinge substitution. See the practical considerations for <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/pivot-exterior-doors\">pivot exterior doors<\/a> before fixing the opening and hardware.<\/p>\n<p>Arch tops, Dutch doors, and sidelight-and-transom combinations are geometry options that can be built around these operating families. They don&#039;t automatically create a different performance class. The shape still has to work with the wall, glass, seals, and selected hardware.<\/p>\n<p><a id=\"specify-the-frame-family\"><\/a><\/p>\n<h3>Specify the frame family<\/h3>\n<ul>\n<li><strong>Hollow-metal commercial frames<\/strong> are formed from steel sheet and are commonly specified by gauge. A 3-0 leaf in a masonry opening is a straightforward example where a hollow-metal frame can be anchored directly to the surrounding construction.<\/li>\n<li><strong>Solid hot-rolled or profile steel<\/strong> supports slim sightlines and glass stops. A narrow-framed, all-glass swing door in a wood-frame wall can suit this family, provided the wall and anchors are designed for the assembly.<\/li>\n<li><strong>Thermally broken steel profiles<\/strong> interrupt the direct metal path between exterior and interior. A French pair in a cold climate is a typical case for this approach, especially when glazing occupies much of the leaf.<\/li>\n<\/ul>\n<p>The right frame isn&#039;t necessarily the heaviest or the slimmest. A masonry opening may favor a durable commercial frame, while a highly glazed residential entry may place more importance on profile width, thermal separation, and glass specification. Hardware capacity and the header still have to match the chosen leaf and operation.<\/p>\n<p><a id=\"frame-profiles-thermal-breaks-and-cores\"><\/a><\/p>\n<h2>Frame Profiles Thermal Breaks and Cores<\/h2>\n<p>Read the assembly from the outside face toward the inside stop. Commercial hollow-metal frames are often specified in 16 gauge for typical entries, with 14- or 12-gauge steel used when the opening, use, or expected abuse calls for more stiffness. Residential insulated door skins are often much thinner, around 20 to 24 gauge. Those skins are not the same thing as a solid steel profile frame.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/steel-entry-door-and-frame-door-construction.jpg\" alt=\"A cross-section diagram showing the internal structural components of a modern steel entry door and frame assembly.\" \/><\/figure><\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Component<\/th>\n<th>Typical spec<\/th>\n<th>What it changes<\/th>\n<\/tr>\n<tr>\n<td>Commercial hollow-metal frame<\/td>\n<td>16 gauge, about 0.053 inch<\/td>\n<td>Stiffness for a typical entry<\/td>\n<\/tr>\n<tr>\n<td>Heavier hollow metal<\/td>\n<td>14 gauge, about 0.067 inch, or 12 gauge, about 0.093 inch<\/td>\n<td>Abuse resistance and larger openings<\/td>\n<\/tr>\n<tr>\n<td>Residential insulated skin<\/td>\n<td>Often 20 to 24 gauge<\/td>\n<td>Not a substitute for a solid profile frame<\/td>\n<\/tr>\n<tr>\n<td>Solid hot-rolled profile<\/td>\n<td>Slim sightline with glass stops<\/td>\n<td>Conducts heat unless broken<\/td>\n<\/tr>\n<tr>\n<td>Thermal break<\/td>\n<td>Polyamide or similar strut in frame and, where offered, the leaf<\/td>\n<td>Cuts the continuous steel path that causes a cold frame and condensation<\/td>\n<\/tr>\n<tr>\n<td>Leaf core<\/td>\n<td>Polyurethane or similar foam, honeycomb, steel stiffeners at lock and hinge rails<\/td>\n<td>R-value, weight, and hardware-rail stiffness<\/td>\n<\/tr>\n<tr>\n<td>Glazing<\/td>\n<td>Double-pane tempered, often argon; triple where a lower U-factor is required; laminated for impact<\/td>\n<td>Comfort versus hurricane or security duty<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>A solid hot-rolled profile can create the crisp glass-to-metal detail that a thin skin over a foam core can&#039;t. But unbroken steel conducts heat from the exterior face to the interior. In a cold climate, that can leave the inside frame uncomfortably cold and contribute to condensation. A polyamide or similar insulating strut separates the metal sections; some systems offer the break in the leaf as well as the frame. For a closer look at how steel production affects its surface and use, see this guide to <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/hot-rolled-vs-cold-rolled-steel\">hot-rolled and cold-rolled steel<\/a>.<\/p>\n<p>The leaf core is a separate decision from the frame break. Foam, such as polyurethane, insulates the cavity in an insulated leaf. Honeycomb construction can reduce weight where high insulation is less important. Steel stiffeners at the hinge and lock rails give fasteners something substantial to bite into. A heavy lock attached only to a thin skin can loosen, no matter how substantial the surrounding frame looks.<\/p>\n<blockquote>\n<p><strong>Specify the whole section:<\/strong> name the frame profile, the presence or absence of a thermal break, the core, and the glass build-up. \u201cInsulated steel door\u201d doesn&#039;t answer all four questions.<\/p>\n<\/blockquote>\n<p>Glass affects comfort and weight, and it needs to suit the job. Double-pane tempered glazing is a common starting point for a glazed entry; triple glazing may suit a colder climate or a lower U-factor target. Laminated glass addresses impact or security needs, not insulation alone. A slim, unbroken metal frame with ordinary glazing can look right and still feel cold at the room side, so settle the climate and glass requirements before choosing the finish.<\/p>\n<p><a id=\"hardware-thresholds-and-glass-choices\"><\/a><\/p>\n<h2>Hardware Thresholds and Glass Choices<\/h2>\n<p>A hardware schedule only works when the frame is prepared for it. Name the lock, hinges, closer, and threshold before fabrication so the shop can provide the right reinforcement, cutouts, and clearances. Adding hardware after the frame is made can mean compromised fastening, misplaced holes, or a lock that doesn&#039;t align with its strike.<\/p>\n<p>For a standard swing entry, specify heavy butt hinges sized for the leaf, or a continuous gear hinge for a high-use opening. Slim profile steel often suits a European multipoint lock better than a single bored lock, but the frame still needs matching keeps and reinforcement. Commercial or accessible openings also need the lock, pull, panic device, and closer coordinated with the intended operation and clear passage. Confirm those requirements against the project&#039;s adopted accessibility and building rules.<\/p>\n<p>Pivot doors trade side hinges for top and bottom pivots, often with a closer or damper in the head or floor. That hardware transfers load to the head and slab, so both need to be part of the structural design. A pivot package chosen after the header is built can leave the installer with nowhere suitable to anchor it.<\/p>\n<p><a id=\"coordinate-the-sill-and-glass\"><\/a><\/p>\n<h3>Coordinate the sill and glass<\/h3>\n<p>The threshold is the meeting point for air, water, and accessibility. A bumper or saddle threshold may suit a typical residential step; an accessible route calls for a low threshold that works with the adjoining floor. An outswing entry exposed to weather should sit over a sill pan with end dams. Don&#039;t let a door sweep drag on the finished floor, and don&#039;t size the undercut without measuring the threshold and floor together.<\/p>\n<p>Choose glass by function. Tempered safety glass belongs in entry lights; laminated glass is appropriate where impact or added security is required. Obscure or fluted glass trades a clear view for privacy, so use it where that trade-off is deliberate.<\/p>\n<p>For example, an outswing 3-0 thermally broken leaf could pair with a multipoint lock, three hinges, a low threshold, and a double-pane tempered light. That combination still needs a frame reinforced for the lock and hinges, a sill detail suited to the exposure, and a clear path at the threshold. Treat the example as a coordinated schedule, not a menu of interchangeable parts.<\/p>\n<p><a id=\"how-to-frame-and-set-the-assembly\"><\/a><\/p>\n<h2>How to Frame and Set the Assembly<\/h2>\n<p>Give the field crew a sequence that protects the frame from being twisted into a bad opening. A slim profile can be difficult to correct after the surrounding wall is finished, and even a small misalignment can make a multipoint lock miss its keeps.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/steel-entry-door-and-frame-door-installation.jpg\" alt=\"An instructional graphic detailing how to frame and set a door assembly, emphasizing measurement and structural accuracy.\" \/><\/figure><\/p>\n<ol>\n<li><strong>Confirm the rough opening against the shop drawing.<\/strong> Check that the jambs are plumb, the head is level, and the diagonals are square within about 1\/8 inch. If the opening is out of square, correct the framing before setting the unit rather than pulling the frame into shape with anchors.<\/li>\n<li><strong>Size the header for the leaf and operation.<\/strong> Tall pairs and pivot doors need a header designed for their load. A standard single-swing header isn&#039;t a safe default for a heavier, wider assembly.<\/li>\n<li><strong>Prepare the sill before the frame arrives.<\/strong> Set a sloped sill pan with end dams, then lap the weather-resistive barrier over the pan flanges. This gives water a route out instead of into the wall.<\/li>\n<li><strong>Place the frame and shim at fixing points.<\/strong> Set a welded frame or assemble a knock-down frame according to its instructions. Shim near hinges and the strike, and keep the jambs plumb so the leaf won&#039;t bind.<\/li>\n<li><strong>Anchor to the structure.<\/strong> Use masonry tee anchors or suitable existing-opening anchors in block, and wood or steel-stud anchors into framing. Finish trim is not structural support.<\/li>\n<li><strong>Hang the leaf and set the reveals.<\/strong> Adjust the gaps evenly around the leaf. Set the threshold and sweep so they meet without dragging on the finished floor.<\/li>\n<li><strong>Seal the perimeter without blocking drainage.<\/strong> Use backer rod and compatible sealant at the exterior perimeter. Keep the sill pan&#039;s drainage path open; caulking over a weep can trap water where the detail is meant to release it.<\/li>\n<li><strong>Fit hardware and test the complete unit.<\/strong> Check the latch, closer, weatherstrip, and lock engagement together. A lock that only works when the leaf is pulled or lifted needs adjustment before the job is finished.<\/li>\n<\/ol>\n<p>A common failure appears after drywall: the installer twists a slim frame to make it follow an opening that was never made square. The multipoint lock then misses its keeps, or the reveal closes up on one side. Structural gauge belongs in the frame decision, but no gauge makes a badly set frame square. Water-test requirements belong in the project performance specification, not in a guess made at the sill.<\/p>\n<p><a id=\"corrosion-protection-and-finish-systems\"><\/a><\/p>\n<h2>Corrosion Protection and Finish Systems<\/h2>\n<p>Specify a coating stack, not a color. For a carbon-steel exterior frame, name galvanizing or an equivalent zinc-rich pretreatment, followed by a compatible multi-layer powder or wet-paint system. Custom work can be matched to an architect&#039;s selected color, including RAL colors where required.<\/p>\n<p>Factory coating is generally the cleaner route for a welded frame. After glazing, site painting makes it harder to cover glass stops, corners, and narrow returns evenly. Field cuts, welds, and exposed edges are the places to watch: if the coating is damaged there, corrosion can start beneath the finish. Touch up with the manufacturer&#039;s specified system, not an unrelated paint that may fail to bond or seal the steel.<\/p>\n<p><a id=\"adjust-the-protection-to-the-exposure\"><\/a><\/p>\n<h3>Adjust the protection to the exposure<\/h3>\n<p>Coastal air, de-icing salt, and water that sits on the sill call for more than a standard paint finish. A premium system may add a zinc-magnesium or similar enhanced metallic coating before paint, with sealed joints and careful treatment of edges. By contrast, an inland home with a protected entry might use a galvanized frame with a black powder coat. The profile could be the same near salt air, but the coating stack and sill detailing should step up to suit the exposure.<\/p>\n<p>Salt isn&#039;t the only cause of corrosion. Inland entries can rust at the threshold and hinge knuckles if water stays there or the finish is chipped. Check the bottom of the door and frame, drainage openings, and exposed fasteners as part of routine upkeep. A color choice should also work with the home&#039;s exterior materials and trim; this guide to <a href=\"https:\/\/paintersnorthshore.co.nz\/exterior-door-paint\/\">door colour rules for North Shore homes<\/a> offers a useful way to think through that relationship.<\/p>\n<p>Don&#039;t invent a recoating timetable. Inspect the coating and drainage, keep the sill clear, and repair damaged areas with the specified touch-up materials. Impact performance is a product and testing decision, not something a more durable paint system can provide.<\/p>\n<p><a id=\"energy-air-water-and-code-checks\"><\/a><\/p>\n<h2>Energy Air Water and Code Checks<\/h2>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Condition<\/th>\n<th>Frame strategy<\/th>\n<th>Performance to request<\/th>\n<th>Code trigger<\/th>\n<\/tr>\n<tr>\n<td>Mild inland, opaque or lightly glazed<\/td>\n<td>Insulated steel, thermal break optional<\/td>\n<td>Labeled energy performance, continuous weather seals, and a tested air rating<\/td>\n<td>IECC prescriptive or labeled fenestration<\/td>\n<\/tr>\n<tr>\n<td>Cold or mixed climate, large glass<\/td>\n<td>Thermally broken steel with insulated glazing<\/td>\n<td>Lower U-factor, double or triple glazing, condensation control<\/td>\n<td>IECC climate zone and NFRC label<\/td>\n<\/tr>\n<tr>\n<td>Exposed entry, wind-driven rain<\/td>\n<td>Broken or unbroken steel with sill pan<\/td>\n<td>Tested air leakage and water resistance for the project exposure<\/td>\n<td>Project water-penetration spec<\/td>\n<\/tr>\n<tr>\n<td>Means of egress or accessible route<\/td>\n<td>Frame, leaf, and hardware selected to preserve required clear width<\/td>\n<td>Clear opening, operating hardware, and closer suited to the route<\/td>\n<td>IBC egress and ADA<\/td>\n<\/tr>\n<tr>\n<td>Hurricane or HVHZ coast<\/td>\n<td>Impact-rated aluminum or tested steel<\/td>\n<td>Large-missile, cyclic pressure, and NOA or state approval<\/td>\n<td>Florida Building Code or Miami-Dade<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>For a starting comparison, an insulated non-thermal steel entry can land in a U-factor band around 0.20 to 0.40, depending on the core, glass, and frame. A continuous steel frame can still feel cold even if the leaf contains insulation. Ask for the rating of the complete assembly rather than treating the leaf&#039;s core as a proxy for the frame and glazing.<\/p>\n<p><a id=\"match-the-test-to-the-exposure\"><\/a><\/p>\n<h3>Match the test to the exposure<\/h3>\n<p>Architects commonly specify ASTM E283 for air leakage, ASTM E331 for water penetration, and ASTM E330 for structural load. AAMA\/WDMA\/CSA 101\/I.S.2\/A440 combines fenestration requirements, while NFRC labeling can document U-factor and solar heat gain where the energy code calls for it. A water-resistance rating describes the pressure a tested opening holds in the lab; it isn&#039;t a field promise that a poor sill detail will stay dry.<\/p>\n<p>Egress and accessibility depend on the clear passage, not the nominal leaf size. A nominal 3-0 door may or may not provide a 32-inch clear opening once stops, hardware, and the actual open angle are counted. Check the required route and the adopted code with the full assembly shown.<\/p>\n<p>Hurricane and high-velocity zones change the product decision. The opening may need impact-rated glazing and a tested assembly that meets the local protocol, often including large-missile impact and cyclic pressure. In Florida and Miami-Dade, the project&#039;s approval requirements can make a certified aluminum system a better fit than ordinary steel. Don&#039;t treat a standard steel door as hurricane-ready because it is heavy or well coated.<\/p>\n<p><a id=\"write-the-spec-and-order-the-assembly\"><\/a><\/p>\n<h2>Write the Spec and Order the Assembly<\/h2>\n<p>A useful door schedule carries decisions from the wall opening through the finish, without leaving the frame to be selected later. Record the nominal size, rough opening, and jamb depth. Then name the operation and swing, profile or gauge, thermal break, glass, hardware, threshold, anchor type, sill pan, coating, color, and performance requirements that apply.<\/p>\n<p>A sample line might read: \u201c3-0 by 8-0 outswing single, thermally broken solid-steel frame, double-pane tempered argon glass, multipoint lock, low threshold, galvanized and powder-coated black, set in a custom jamb return with sill pan.\u201d Add the applicable U-factor target, air and water tests, clear-width requirement, and impact approval to the schedule. Those requirements should follow the project&#039;s climate, exposure, and code conditions rather than appear as generic boilerplate.<\/p>\n<p>A stock hollow-metal catalog can be a good fit for a straightforward commercial opening. It is less useful when the design depends on a custom arch, a narrow sightline, or a thermally broken steel profile. In that case, use a shop drawing that shows the leaf, frame, glazing, hardware preparation, wall return, and sill as one coordinated unit. For projects with controlled vehicle entry, <a href=\"https:\/\/nimbio.com\/how-to-choose-a-cellular-gate-access-system\/\">gate access system evaluation criteria<\/a> can help organize a separate access-control discussion without confusing that decision with the door&#039;s frame specification.<\/p>\n<p>For a custom steel opening, we make made-to-order entry, French, arch, and pivot systems on ultra-durable Ottostumm steel frames, including fully custom solid-steel thermal-break frames. Our fully customizable Solid Steel Glass Entry Door starts from $3,998.00. Send the opening width and height, wall depth, swing, climate zone, and impact requirement with the design intent so the shop drawing can resolve the assembly before the order is placed.<\/p>\n<hr>\n<p>Black Badge Doors offers made-to-order steel entry assemblies with custom sizes, slim profiles, and thermally broken frame options. If your opening calls for a coordinated steel door and frame rather than a stock leaf, share the project requirements with <a href=\"https:\/\/blackbadgedoors.com\">Black Badge Doors<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A remodel can reach the point where the opening is framed, the floor is nearly finished, and the chosen door still doesn&#039;t fit. The header may be too low for a transom, a sidelight may crowd the swing, or the planned threshold may sit above the finished floor. At that stage, changing the leaf alone [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":307,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[211,210,166,208,209],"class_list":["post-308","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized","tag-door-frame-installation","tag-entry-door-sizes","tag-steel-door-specs","tag-steel-entry-door-and-frame","tag-thermal-break-frames"],"_links":{"self":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/308","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/comments?post=308"}],"version-history":[{"count":1,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/308\/revisions"}],"predecessor-version":[{"id":312,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/308\/revisions\/312"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media\/307"}],"wp:attachment":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media?parent=308"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/categories?post=308"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/tags?post=308"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}