{"id":341,"date":"2026-11-21T04:57:39","date_gmt":"2026-11-21T09:57:39","guid":{"rendered":"https:\/\/blackbadgedoors.com\/blogs\/news\/sliding-doors-steel.html"},"modified":"2026-11-21T04:57:40","modified_gmt":"2026-11-21T09:57:40","slug":"sliding-doors-steel","status":"publish","type":"post","link":"https:\/\/blackbadgedoors.com\/blogs\/news\/sliding-doors-steel.html","title":{"rendered":"Sliding Doors Steel Guide for Large Openings"},"content":{"rendered":"<p>A kitchen renovation can leave you with a wide opening to the garden and nowhere for a hinged door to swing. An island blocks one side, the main path runs through the other, and a conventional patio slider would still cover part of the view when open. That&#039;s when a steel slider becomes a serious option, but the narrow black frame shouldn&#039;t be the first decision.<\/p>\n<p>The wall, local climate, and amount of opening you need clear should set the system. A slim profile can&#039;t compensate for a pocket full of plumbing, a threshold that traps water, or a heavy panel the structure can&#039;t support.<\/p>\n<h2>Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-a-steel-sliding-door-is\">What a Steel Sliding Door Is<\/a><ul>\n<li><a href=\"#where-steel-works-and-where-it-doesnt\">Where steel works, and where it doesn&#039;t<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#pocket-bypass-and-lift-and-slide-compared\">Pocket Bypass and Lift and Slide Compared<\/a><ul>\n<li><a href=\"#what-each-operation-asks-of-the-building\">What each operation asks of the building<\/a><\/li>\n<li><a href=\"#when-weather-sealing-matters\">When weather sealing matters<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#slim-sightlines-strength-and-heat-control\">Slim Sightlines Strength and Heat Control<\/a><ul>\n<li><a href=\"#separate-interior-strength-from-exterior-comfort\">Separate interior strength from exterior comfort<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#glass-and-finish-choices\">Glass and Finish Choices<\/a><ul>\n<li><a href=\"#choose-glass-by-the-job\">Choose glass by the job<\/a><\/li>\n<li><a href=\"#choose-finish-for-exposure-and-architecture\">Choose finish for exposure and architecture<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#specifications-to-request-from-the-maker\">Specifications to Request from the Maker<\/a><ul>\n<li><a href=\"#dont-leave-the-important-blanks\">Don&#039;t leave the important blanks<\/a><\/li>\n<li><a href=\"#compare-the-whole-assembly\">Compare the whole assembly<\/a><\/li>\n<\/ul>\n<\/li>\n<li><a href=\"#how-the-opening-decides-installation\">How the Opening Decides Installation<\/a><\/li>\n<li><a href=\"#where-to-use-one-and-what-to-order-next\">Where to Use One and What to Order Next<\/a><\/li>\n<\/ul>\n<p><a id=\"what-a-steel-sliding-door-is\"><\/a><\/p>\n<h2>What a Steel Sliding Door Is<\/h2>\n<p>In that kitchen, a steel sliding door would move glazed panels sideways rather than swing them into the room. The steel frame can carry tall glass with a narrow profile, leaving more of the opening visible. Think of the steel as a thin picture rail and the glass as the picture. The track determines how much of that picture you can walk through.<\/p>\n<p>Three parts shape the choices that follow: the <strong>moving panel<\/strong>, the <strong>head and sill track<\/strong>, and the <strong>meeting stile<\/strong>, where panels meet, overlap, or pass one another. The panel&#039;s weight affects the hardware and structure. The track sets the path and parking space. The meeting stile affects the joint between panels and, on an exterior door, how they close against the weather.<\/p>\n<p><a id=\"where-steel-works-and-where-it-doesnt\"><\/a><\/p>\n<h3>Where steel works, and where it doesn&#039;t<\/h3>\n<p>Steel sliders suit exterior walls, tall interior partitions, and storefront-style spans where clearance or a slim profile matters. They can preserve a clean sightline across a living room or let an interior room borrow daylight from an adjacent space.<\/p>\n<p>They&#039;re a poor fit for a shallow closet where a simpler lightweight door does the job, or for a wall that can&#039;t carry the combined weight of the glass and steel. A slider also needs somewhere for its panels to travel or park. If the available wall and track space don&#039;t support the intended opening, the slim frame won&#039;t solve that constraint.<\/p>\n<p>The practical order is to choose the operation first, then match the frame&#039;s strength and heat control to the climate. After that, choose glass and finish, build a clear specification, and confirm the opening is ready to receive the door.<\/p>\n<p><a id=\"pocket-bypass-and-lift-and-slide-compared\"><\/a><\/p>\n<h2>Pocket Bypass and Lift and Slide Compared<\/h2>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Configuration<\/th>\n<th>How it moves<\/th>\n<th>Wall space needed<\/th>\n<th>Best opening<\/th>\n<th>Main trade-off<\/th>\n<\/tr>\n<tr>\n<td>Pocket<\/td>\n<td>Panel slides into a wall cavity<\/td>\n<td>Clear pocket free of structure and services<\/td>\n<td>Opening that must go fully clear<\/td>\n<td>Pocket cannot hide wiring or studs<\/td>\n<\/tr>\n<tr>\n<td>Bypass<\/td>\n<td>Panels pass on parallel tracks<\/td>\n<td>No pocket; panels stay in the opening<\/td>\n<td>Wide span where one panel can stay parked<\/td>\n<td>Never a fully clear aperture<\/td>\n<\/tr>\n<tr>\n<td>Lift and slide<\/td>\n<td>Handle lifts the panel off the seal, then it glides<\/td>\n<td>Stacking space to one side on the track<\/td>\n<td>Large exterior openings that must seal tight<\/td>\n<td>Heavier hardware and a detailed sill<\/td>\n<\/tr>\n<tr>\n<td>Multi-slide<\/td>\n<td>Several panels stack on one or more tracks<\/td>\n<td>A stacking bay at one end<\/td>\n<td>Room-width walls of glass<\/td>\n<td>More tracks mean a deeper frame<\/td>\n<\/tr>\n<\/table><\/figure>\n<p>Choose a pocket when the full aperture must clear, a bypass when a parked panel is acceptable and there&#039;s no wall cavity, lift-and-slide for a large exterior opening that must seal tightly, and multi-slide when the design calls for a wall of glass.<\/p>\n<p><a id=\"what-each-operation-asks-of-the-building\"><\/a><\/p>\n<h3>What each operation asks of the building<\/h3>\n<p>A <strong>pocket door<\/strong> disappears into the wall, but the pocket has to be planned as a dedicated cavity. Studs, plumbing, electrical wiring, and switches can&#039;t occupy the panel&#039;s travel path. That makes pocketing attractive in new construction or a renovation with an open wall, but often difficult to add late.<\/p>\n<p>A <strong>bypass door<\/strong> needs no wall cavity. Its panels travel on parallel tracks and remain in the aperture, so the opening is never entirely clear. That&#039;s often a sensible compromise when a swing leaf would collide with an island, furniture, or a circulation route.<\/p>\n<p><a id=\"when-weather-sealing-matters\"><\/a><\/p>\n<h3>When weather sealing matters<\/h3>\n<p>A <strong>lift-and-slide<\/strong> handle raises the panel clear of its gasket so the heavy leaf can glide, then lowers it to compress the seal when closed. That operation is suited to demanding exterior openings, but the panel, hardware, and sill all need careful specification. A <strong>multi-slide<\/strong> uses several panels and a stacking bay to open a broad wall. Each additional track adds depth to the frame, so confirm that the resulting sill and floor transition suit the room.<\/p>\n<p>Interior hollow-steel sliders can use similar motions without needing the exterior weather seal. They divide space while retaining a light, open appearance, but shouldn&#039;t be specified as though they&#039;re exposed exterior doors.<\/p>\n<p><a id=\"slim-sightlines-strength-and-heat-control\"><\/a><\/p>\n<h2>Slim Sightlines Strength and Heat Control<\/h2>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/sliding-doors-steel-steel-frame-benefits.jpg\" alt=\"A diagram illustrating the benefits of slim steel frames for windows, focusing on sightlines, strength, and thermal efficiency.\" \/><\/figure><\/p>\n<p>Steel&#039;s narrow sightline is a structural result, not just a style choice. A suitably designed steel profile can support tall glass without the heavier-looking sections often needed with other frame materials. That can make a meaningful difference on a living-room wall or storefront, where the frame takes up part of the view.<\/p>\n<p>Strength still depends on the actual steel section, panel dimensions, glass makeup, and supporting structure. \u201cSlim\u201d doesn&#039;t tell you the profile thickness, hardware capacity, or whether the header can carry the assembly. Ask for dimensions and performance details rather than judging only from a rendering.<\/p>\n<p><a id=\"separate-interior-strength-from-exterior-comfort\"><\/a><\/p>\n<h3>Separate interior strength from exterior comfort<\/h3>\n<p>Hollow steel can be appropriate for an interior partition, pool house, or secondary structure where the door separates spaces without needing an exterior thermal seal. For an exterior door in a cold or mixed climate, a <strong>thermally broken frame<\/strong> separates the indoor and outdoor portions of the steel profile, reducing direct heat transfer through the frame.<\/p>\n<p>Pair that frame with insulated glazing. Improving the frame while leaving a weak point at the glass limits the benefit. If you&#039;re comparing glazing options, this guide to <a href=\"https:\/\/premierbuilders.ie\/benefits-of-installing-energy-efficient-windows-and-glazing\/\">upgrading to double glazed windows<\/a> provides useful context on the role of insulated glass.<\/p>\n<p>Think of a thermally broken steel frame as a thermos rather than a metal cup: the material is still steel, but the separation changes how readily heat travels through it. For more detail on how the frame and glazing work together, see this explanation of a <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/sliding-insulated-door\">sliding insulated door<\/a>.<\/p>\n<p>Coastal and hurricane exposure create a different performance problem from cold weather. Thermal separation addresses heat transfer; it doesn&#039;t establish impact resistance or approval for local wind conditions. Where impact approval is required, an impact-rated system, often in aluminum, may be the more suitable specification than ordinary steel.<\/p>\n<blockquote>\n<p><strong>Choose performance before color:<\/strong> Set the operation first, then select hollow, solid, or thermally broken construction for the site. A finish can&#039;t correct a frame that&#039;s wrong for the climate.<\/p>\n<\/blockquote>\n<p><a id=\"glass-and-finish-choices\"><\/a><\/p>\n<h2>Glass and Finish Choices<\/h2>\n<p>Keep the frame decision fixed while you choose what the glass needs to do. Start with the room&#039;s use, then select the glazing and finish that suit it.<\/p>\n<p><a id=\"choose-glass-by-the-job\"><\/a><\/p>\n<h3>Choose glass by the job<\/h3>\n<p>For a garden or courtyard wall, clear tempered glass preserves the view and gives a straightforward, transparent appearance. On an exterior residential door, insulated double-pane glass is a common starting point. Triple glazing may suit a colder climate, but it should be paired with a thermally broken frame rather than treated as a stand-alone fix.<\/p>\n<p>Laminated glass is useful where a panel sits beside a walkway or street and you want a safety and acoustic layer. For a bath, office, or interior partition, frosted, fluted, or rain glass can soften visibility while passing daylight. Divided lites are another design choice: simulated or true dividers can establish a traditional rhythm, while a single uninterrupted panel keeps a more contemporary look.<\/p>\n<p><a id=\"choose-finish-for-exposure-and-architecture\"><\/a><\/p>\n<h3>Choose finish for exposure and architecture<\/h3>\n<p>A dark, narrow frame is a familiar modern choice, but color and texture can be coordinated with cabinetry, brick, or bronze-toned interiors. Dividers belong to the glass design; paint and protective coatings belong to the steel. Keep those decisions distinct so a preferred color doesn&#039;t dictate the glass arrangement.<\/p>\n<p>For an exterior frame, the protective coating system matters as much as the visible color. Galvanizing followed by a multi-layer paint system helps resist corrosion, while some premium systems use zinc-magnesium coating as part of their protection. That preparation is particularly relevant in damp or exposed locations; bare steel left unprotected is a poor choice where moisture can reach it.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/sliding-doors-steel-glass-types.jpg\" alt=\"A modern room featuring three large sliding glass doors showcasing different glass types overlooking a lush garden.\" \/><\/figure><\/p>\n<p>Choose glass for the room&#039;s view, heat, privacy, and safety needs, then choose the finish to suit the architecture and exposure. Confirm that both are available with the frame construction you&#039;ve selected.<\/p>\n<p><a id=\"specifications-to-request-from-the-maker\"><\/a><\/p>\n<h2>Specifications to Request from the Maker<\/h2>\n<p>Put the project details into the quote request, not just a reference image. This checklist makes it easier to compare proposals on the door you&#039;ll receive.<\/p>\n\n<figure class=\"wp-block-table\"><table><tr>\n<th>Spec to request<\/th>\n<th>What to state<\/th>\n<th>Why it changes the door<\/th>\n<\/tr>\n<tr>\n<td>Opening<\/td>\n<td>Width, height, panel count, required clear width<\/td>\n<td>Sets track length and whether a pocket or stack bay fits<\/td>\n<\/tr>\n<tr>\n<td>Operation<\/td>\n<td>Pocket, bypass, lift-and-slide, or multi-slide<\/td>\n<td>Decides hardware, seal, and wall space<\/td>\n<\/tr>\n<tr>\n<td>Frame build<\/td>\n<td>Hollow, solid, or thermally broken<\/td>\n<td>Matches interior use or exterior climate<\/td>\n<\/tr>\n<tr>\n<td>Steel section<\/td>\n<td>Gauge or thickness and sightline width<\/td>\n<td>Separates a real slim profile from a vague claim<\/td>\n<\/tr>\n<tr>\n<td>Glazing<\/td>\n<td>Tempered, double or triple, gas, laminated, or textured<\/td>\n<td>Sets safety, heat, noise, and privacy<\/td>\n<\/tr>\n<tr>\n<td>Finish<\/td>\n<td>Coating system and color<\/td>\n<td>Sets corrosion resistance and the architectural match<\/td>\n<\/tr>\n<tr>\n<td>Hardware<\/td>\n<td>Handle type, and ADA or panic hardware if commercial<\/td>\n<td>Affects operation and code on public doors<\/td>\n<\/tr>\n<tr>\n<td>Performance<\/td>\n<td>Whole-unit U-factor, solar gain, air leakage, impact rating if coastal<\/td>\n<td>Shows energy and wind claims for the assembly, not the glass alone<\/td>\n<\/tr>\n<\/table><\/figure>\n<p><a id=\"dont-leave-the-important-blanks\"><\/a><\/p>\n<h3>Don&#039;t leave the important blanks<\/h3>\n<p>Begin with rough opening width and height, panel count, and the clear width you need when the door is open. Then name the operation and frame build. \u201cLarge black slider\u201d isn&#039;t enough to establish whether a pocket is possible, how panels park, or what kind of track and seal the quote includes.<\/p>\n<p>Ask for the steel gauge or wall thickness and the sightline width. A profile can look slim in a drawing while differing substantially in section size. Request the glazing makeup in layers, including whether it&#039;s tempered, double- or triple-pane, gas-filled, laminated, or textured. If divided lites matter, state the pattern rather than leaving the maker to infer it from a photo.<\/p>\n<p><a id=\"compare-the-whole-assembly\"><\/a><\/p>\n<h3>Compare the whole assembly<\/h3>\n<p>For an energy-focused exterior project, request whole-unit U-factor, solar heat gain, and air-infiltration performance. A glass-only figure doesn&#039;t describe how the frame, panel joints, and sill work together. For coastal exposure, ask whether the proposed assembly is impact-rated for the project&#039;s local requirements.<\/p>\n<p>State the coating system and color, the handle type, and any accessibility or panic hardware needed for a commercial opening. Commercial occupancy can affect hardware and code requirements, so resolve those needs before fabrication. Include the sill height and water-management approach for exterior units.<\/p>\n<p>For reference, <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/metal-doors-with-glass\">metal doors with glass<\/a> can involve different frame and glazing combinations, so specify the construction rather than relying on a general product label. Also include the intended delivery and installation sequence in the project schedule. Custom doors are made to the confirmed opening, and the finished unit needs careful handling during shipping and site work.<\/p>\n<blockquote>\n<p>If two quotes omit the steel section, thermal-break construction, or glazing makeup, they don&#039;t describe the same door.<\/p>\n<\/blockquote>\n<p><a id=\"how-the-opening-decides-installation\"><\/a><\/p>\n<h2>How the Opening Decides Installation<\/h2>\n<p>A steel slider succeeds or fails at the opening as much as at the factory. Work through the site conditions in order, and give each trade a clear responsibility before the finished unit arrives.<\/p>\n<ol>\n<li><p><strong>Check the rough opening and header.<\/strong> Verify that the opening is square and the header can support the glass-and-steel assembly. If the frame is out of square or the header deflects, panels may bind or meeting stiles may fail to align.<\/p>\n<\/li>\n<li><p><strong>Clear the pocket, if there is one.<\/strong> Keep the cavity open through the panel&#039;s full travel and relocate wiring, plumbing, or obstructions before the frame arrives. A switch box or pipe in the path can stop a pocket panel from disappearing fully.<\/p>\n<\/li>\n<li><p><strong>Reserve the stack and track space.<\/strong> For bypass or multi-slide systems, coordinate the stacking bay and track depth with the finished floor. If flooring rises into the sill or the bay is too short, the panel can be pinched or won&#039;t park as intended.<\/p>\n<\/li>\n<li><p><strong>Set the exterior sill and drainage path.<\/strong> Support the threshold evenly, keep it level, and plan where water will drain. A poorly supported or blocked sill can compromise the seal and leave water with nowhere to go.<\/p>\n<\/li>\n<li><p><strong>Hang and adjust the panels.<\/strong> Set the rollers, align meeting stiles, and check that each panel travels freely. On lift-and-slide systems, the panel should lower evenly onto the gasket; uneven adjustment can leave a gap or make the handle difficult to operate.<\/p>\n<\/li>\n<li><p><strong>Protect the finished frame.<\/strong> Keep abrasive work, cutting, and construction debris away from the coating. A made-to-order steel frame isn&#039;t a site-cut component, and damage during adjacent trades can expose the metal.<\/p>\n<\/li>\n<\/ol>\n<p>A retrofit in an older wall may rule out a pocket because the cavity contains structure or services. A flush interior floor can also conflict with a sill designed to manage exterior water. For a second-story opening, plan the hoist and delivery route before the crate reaches the site.<\/p>\n<p>For wall coordination, it can help to <a href=\"https:\/\/cs1realinteriors.com\/metal-framing-contractors\/\">compare Portland metal stud contractors<\/a> when a project involves metal framing work. Custom openings also call for dimensions that match the actual build, not just a nominal size; this guide to <a href=\"https:\/\/blackbadgedoors.com\/blogs\/news\/custom-dimensions\">custom door dimensions<\/a> helps frame that conversation.<\/p>\n<p><figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-content\/uploads\/2026\/11\/sliding-doors-steel-installation-guide.jpg\" alt=\"A four-step infographic illustrating how to correctly install glass and steel sliding doors in a home.\" \/><\/figure><\/p>\n<p>Installation details are easier to coordinate when the manufacturer and installer agree on what each party owns:<\/p>\n<iframe width=\"100%\" style=\"aspect-ratio: 16 \/ 9\" src=\"https:\/\/www.youtube.com\/embed\/Hfc7OAhr14Y\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen><\/iframe>\n\n<p>The manufacturer fabricates to the confirmed opening. The installer is responsible for structure, level, adjustment, and water management at the site.<\/p>\n<p><a id=\"where-to-use-one-and-what-to-order-next\"><\/a><\/p>\n<h2>Where to Use One and What to Order Next<\/h2>\n<p>A custom home with a living room opening onto a terrace may suit a lift-and-slide or multi-slide arrangement. In a cold climate, specify insulated glass and a thermally broken frame, and settle the sill detail alongside the floor plan rather than during installation.<\/p>\n<p>A tight renovation calls for a different decision. If the wall cavity is clear and you need the whole opening free, a pocket may be workable. If the wall can&#039;t accept a pocket but a parked panel is fine, bypass can keep a leaf from swinging into an island or walkway.<\/p>\n<p>For a den, pantry office, or bath, an interior hollow-steel slider can divide rooms without turning a partition into a heavy exterior-style assembly. Retail, hospitality, and mixed-use storefronts can use sliding panels at public openings, with accessible or panic hardware specified where the occupancy requires it.<\/p>\n<p>A room-width opening only works as intended when the header, stacking bay, and sill drainage are coordinated before the order. The slim frame is the visible part; the wall and floor determine whether the door can operate and seal as planned.<\/p>\n<p>Black Badge Doors makes custom, factory-direct steel sliding doors for residential and commercial projects in the United States. Its sliding doors use imported Swiss steel frames with all-glass panels; solid-steel frames are 5 mm thick and 7 gauge, and thermally broken options are available for cold climates. The sale price starts at $3,999.00.<\/p>\n<p>Before requesting a quote, measure the clear width and height, note how much of the opening must clear, and state the operation and climate. Send those details with the specification list so the proposal describes a made-to-order unit that fits the building, rather than a door chosen from its appearance alone.<\/p>\n<hr>\n<p>If your project needs a slim steel slider, <a href=\"https:\/\/blackbadgedoors.com\">Black Badge Doors<\/a> offers custom-made options with different frame constructions and glass choices. Share the opening dimensions, operation, and climate requirements to start a specification-led conversation.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A kitchen renovation can leave you with a wide opening to the garden and nowhere for a hinged door to swing. An island blocks one side, the main path runs through the other, and a conventional patio slider would still cover part of the view when open. That&#039;s when a steel slider becomes a serious [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":340,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[223,224,222,120,142],"class_list":["post-341","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized","tag-lift-and-slide","tag-pocket-sliding-doors","tag-sliding-doors-steel","tag-steel-sliding-doors","tag-thermally-broken-steel"],"_links":{"self":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/341","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/comments?post=341"}],"version-history":[{"count":1,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/341\/revisions"}],"predecessor-version":[{"id":345,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/posts\/341\/revisions\/345"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media\/340"}],"wp:attachment":[{"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/media?parent=341"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/categories?post=341"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blackbadgedoors.com\/blogs\/news\/wp-json\/wp\/v2\/tags?post=341"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}